1. Do not move frequently after installation. When using the product, some users often move the water purification equipment at will, which will lead to no water from the water purification equipment. Because the internal parts of the water purifier are linked by connectors, frequent moving may cause damage to the internal parts and affect its use function.
2. Pay attention to the frequent replacement of the filter element and the multistage filter element in the osmotic membrane water purifier. The service life of the filter element with different materials is different. The service life of the filter element is between 3-12 months. If the user finds that the produced water is getting more and more turbid while cleaning the filter element is still the same, it means that the filter element needs to be replaced.
3. Anti-freezing measures shall be taken for equipment installed outdoors. If it is installed outdoors, anti-freezing measures must be taken. Failure to take anti-freezing measures may lead to frost cracking of filter bottles, membrane shells, etc. The water purifier must be stopped when the temperature is below zero. Because the volume of water will expand during the solidification process, if it freezes, all the pipes, filter bottles, membrane shells, etc. of the water purifier will burst, resulting in water leakage.
4. How to deal with ice in case of ice? During this winter season, the water purifier may freeze. During this period, the water purifier cannot be forced to start to make water. After starting, check whether there is water leakage. If it is found that the unopened reverse osmosis membrane freezes, it can be placed in cold water with the package and soaked for more than 24 hours before use.
5. Create a good working environment for the water purifier to help it live longer. Finally, we should ensure the environmental sanitation of the location where the water purifier is installed, and do not be exposed to direct sunlight to avoid heat sources. In addition, each household water purifier has its own working parameters, such as water temperature, water pressure and water quality. So we should first understand the working parameters. If the water pressure does not meet the requirements, we need to install (increase) the pressure reducing valve. If the water quality does not meet the requirements, we need to install pre-filtration.